How to install solar street lights to achieve maximum effect

A lot of technical knowledge is also involved in the installation process of solar solar street light. As long as people follow the operating procedures, the maximum effect of solar street lights can be demonstrated.　　1, foundation pouring　　 when installing solar street lights, you must determine the position of the pole to be erected. Regarding the surveying geology, deep excavation is necessary when the ground is about 1 meter of soft soil. And it is clear that the lower part of the excavation location involves cables, pipes, etc. There is no sunshade on the top of the solar street lamp, otherwise the excavation location must be changed.　　2. Pre-embedded parts pouring 　　 A 1m 3 deep pit should be reserved at the position of the vertical lamps for the embedded parts pouring. The embedded part is placed in the pit, one end of the PVC line pipe is placed in the center of the embedded part, and the other end is placed at the battery. Keep the embedded parts, the foundation and the original ground at the same level, and pay attention to the top of the screw and the original ground at the same level. One side should be basically parallel to the road; this ensures that the light pole is erected and the rear end is straight. After that, it was poured with C20 concrete, and the vibrating rod kept vibrating during pouring to ensure its compactness and firmness.　　3. Disposal after construction 　　 After the solar solar street light construction is completed, the residue on the positioning plate should be cleaned in time, and various impurities on the bolts should be cleaned to ensure that it can be flexibly selected and repaired in the future. Furthermore, in the process of concrete solidification, the concrete must be watered and cured in time. The chandelier can be installed only after the concrete has basically solidified, that is, about 72 hours later.　　4. Battery assembly installation 　　 During the solar street lamp installation process, it also involves the installation of the solar panel output positive and negative poles, which must be avoided before connecting to the controller; otherwise, quality problems may occur. Furthermore, the connection between the solar cell module and the bracket must be extremely firm, safe and reliable; the output wire of the solar module must be avoided from being exposed, and must be tightened and fastened during installation; the cell module must be facing the south direction. Orient yourself to the sun.　　 In summary, in the installation process of solar street lights, there is a lot of knowledge involved, but the most important thing is safety. When installing, follow the operating procedures to achieve the best installation effect.
Sky Resources Solar Technology Co.，ltd. is dedicated to servicing our customers with a wide array of high-quality service and products.
Grab great deals to buy at Sky Resources Solar Technology Co.，ltd. . Visit us today on SRS Solar Street Light.
As the full potential of custom made solar lights lies in , the demand for is increasing globally, and is being adopted across the global market.