SRS 23 years Professional in PV intelligent application,solar powered street lights.

SRS

High pole lamp manufacturers: the preparation and assembly work that must be known for the installation of high pole lamps

by:SRS     2021-05-14
The installation of high pole solar street lights may be relatively complicated, so most people may know little about this knowledge. It may be very simple in theory, but the actual operation is a bit difficult. This is a technically-testing job. If I am not careful, I will be prone to errors. I believe that most people will take it lightly when they see its installation steps. It has very few installation steps. So many people think about this piece of cake when they see the installation steps, who knows how difficult it is to install. So, let's take a look at the installation steps of the high pole lamp with the high pole lamp manufacturer below. Preparation 1. When shipping the equipment, check the parts according to the list to prevent any omissions. Otherwise, you have to prepare the materials again. To do this work requires patience and carefulness, otherwise it will be easy to make mistakes, so check the materials again. You can arrange for two people not to cooperate at this time, so as not to cause unnecessary trouble.  2. When checking the materials, carefully observe whether each part is intact and whether the model is correct.  3. It is necessary to correctly verify the type, number of sections and order number indicated on the plate on each section of the rod. It is necessary to mark the weight with a marker, check whether the goods are complete, and judge whether the lifting capacity of the crane matches the weight of the rod body.  4. According to the installation diagram of the lamp, mark the pole body to avoid errors when nesting. Assembly work 1. The pole body of the high pole lamp needs to be spliced u200bu200bsection by section, but the length will change due to different manufacturers and unavoidable errors. Therefore, the maximum and minimum values u200bu200bmust be provided before socketing. .  2. In order to facilitate the installation, you need to use lubricating oil. Do not let the lubricating oil contaminate the rod body during use. This will cause the rod body to rot and rust. After using the lubricating oil, you can use soapy water to clean the rod body.  3. Be sure to use force when socketing, so that the rod can be connected firmly. Judging from the installation steps introduced by the high-pole lamp manufacturers above, the installation of high-pole lamps is very easy, but some of the steps are very difficult to operate and require the operator to be careful enough, so you must not underestimate the high-pole lamp. The installation process of pole lights.
Sky Resources Solar Technology Co.,ltd. has created a professional team which contained with a numbers of engineers and technology experts.
Excellent quality yet affordable best at SRS Solar Street Light. Don't miss out!
The led street light manufacturers solar light has significantly numerous benefits over other custom made solar lights systems, which makes it first choice for led street light manufacturers.
Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of solar light.
To derive the optimal value out of custom made solar lights solar light for your home, make sure they're purchased from a globally certified organization to ensure quality in use. Such an offer can be found at SRS Solar Street Light.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
thank you for your inquary. We will reply you ASAP. Welcome contact me by sales@solartech-sr.com or WhatsApp: 008613823920167