Detailed installation steps of solar street lights

Generally speaking, solar street light manufacturers will attach installation projects, but because solar street light are actually not difficult to install, you can install them yourself if you learn the installation steps. The first step is to set up the light pole on the concrete foundation. Generally, solar solar street light manufacturers will first survey the soil conditions at the location of the street light when installing, because the depth of excavation required for different soil types will be different, and at the same time, it is necessary to determine whether the underground is There is a cable duct, whether there is a shelter above, etc. The second step, after confirming the installation location, you can dig it. Generally, a pit of one to three meters is digged, the embedded parts are placed, and the light pole is erected, then the pouring operation can be carried out. After the construction is completed, pay attention to the Impurities are cleaned out, and the solidification of concrete generally takes more than three days. In this process, attention should be paid to watering and maintenance work, and subsequent installation work can only be carried out after complete solidification.　　The third step is to install the solar panel. 　　When performing this installation, pay attention to the positive and negative output of the battery panel to be processed first, so as to avoid short-circuiting when connecting to the controller. The connection of the bracket should be firm, the output cable should not be exposed, and the cable tie should be used to tie it firmly. Generally, the battery board should be installed facing the south, and the direction determined by the compass shall prevail.　　The fourth step is to install the battery. 　　Pay attention to when installing the battery. When putting it into the control box, the action should be gentle to avoid damage to the control box. The connecting wire should use copper gaskets and bolts to increase its conductive performance. The output wire is not allowed to be short-circuited to avoid damage to the battery. The connection between the output line and the controller must use a PVC pipe. After the installation is completed, carefully check the wiring of the first section of the controller to avoid short-circuit conditions, and finally close the control box door.　　Fifth step, install lamps and lanterns　　Check whether the solar panel and lamp holder are fixed and whether the lamp holder can work normally, then carry out the lifting operation, and finally carry out the system debugging, check whether it can work normally, and everything is normal.　　 After all, solar street light manufacturers still have to pay a certain fee for installation. If you learn the above installation steps, you can install it yourself, so you can save a part of the cost, which is definitely a cost-effective thing.
Sky Resources Solar Technology Co.，ltd. will continue to build a corporate culture that respects and values the unique strengths and cultural differences of our associates, customers and community.
Sky Resources Solar Technology Co.，ltd. is an expert when it comes to solar light. Got some solar light problems that you want to address? Visit us now and we'll help you fix those problems ASAP. Go to SRS Solar Street Light for more details.
We should take a step back to review how SRS approach tracking, implementing, and communicating compliance-related changes and attempt to identify areas of improvement in their processes.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of solar light right away.
The first machine to produce led street light manufacturers, the custom made solar lights solar light was invented in led street light manufacturers in custom made solar lights by led street light manufacturers and was subsequently improved.