Installation steps of solar street lights

The installation of solar solar street light is relatively simple compared to the installation of traditional street lights. The installation of solar street lights mainly includes the establishment of foundation, the installation of lamps, the installation of battery components, and the installation of storage batteries. Now we come to understand the installation steps of solar solar street light.　　1. Establish the foundation　　 First determine the location of the solar solar street light, and conduct a field survey on the selected site. If the soil texture is too soft, deepen the excavation depth. Make sure that there is no equipment underground at the selected point, and there is no shading on the top of the solar street lamp, otherwise the site must be re-selected. In the place to be excavated, dig a one-meter-three pit, place the embedded part in the center of the pit, place one end of the threading pipe in the center of the embedded part, and connect the other end to the storage area of u200bu200bthe battery. It is necessary to ensure that the light pole is perpendicular to the roadside and is not crooked or oblique. When using concrete for pouring, water the concrete regularly, and install the chandelier when the concrete is completely solidified. After installation, the remaining concrete should be removed, and the bolts should be cleaned with waste oil.　　2, battery assembly installation　　, the solar panel must be connected to the bracket and the controller correctly. When connecting the controller and the battery panel, be careful not to connect the circuit wrongly, which may cause a short circuit. The output wire of the battery pack should be tightly wrapped with a cable tie to avoid being exposed. The placement of the ancient sword should face south, which can be determined by the compass.　　3. Installation of the battery　　 Place the battery in the control box, and handle the battery gently to avoid damage to the control box. Use bolts to press the connecting wires between the batteries to the terminals, and use copper gaskets to enhance conductivity. The output line of the controller and the battery must pass through the PVC pipe. After installation, check whether the circuit connections are correct to avoid short circuits.　　4. Installation of the lamp　　 Fix the lamp holder on the bracket where the solar panel is fixed, and then connect the arm and bracket to the main pole, and finally connect the connecting wire to the controller.　　 After all the installation is completed, the system must be debugged, whether the street lights can be normally illuminated, whether the controller can be used normally, if everything is normal, seal the control box.
Sky Resources Solar Technology Co.，ltd. is trying to institute social good changes this relationship because it averts a firm's resources from its core task of increasing profits.
go to SRS Solar Street Light to get an amazing offer at favorbale price. the solar light led street light manufacturers actually works and is worth a try.
The best way to determine the ideal strategy of solar light is to continually test and refine your selling and marketing tactics.