SRS 21 years Professional in PV intelligent application,solar powered street lights.

SRS

Solar street light common troubleshooting methods ( A)

by:SRS     2021-01-31
1. Charge indicator LEDI ( Green light) Fast scintillation overpressure system voltage, check whether the battery is open circuit, or whether the battery connection is reliable. 2 or charging circuit damage. Load indicator LED3 ( A red light) Bright, but don't work load check reliable 3 load connection. Load indicator LED3 ( A red light) Fast scintillation, and don't work load load short circuit 4. Load indicator LED3 ( A red light) Slow flash, and the load is not too much work load power 5, flickering lamp holder. Of the cause of the fault, the line contact, electric, battery capacity serious decline, in the case of line no problem, replace the battery. 6, solar street lamps light source is not complete. A lot of solar street lamps use dot-matrix LED light source, in addition to the LED light source itself quality problem, some lamp bead welding will cause this kind of situation. Solution is to replace the corresponding lamp bead, welding solid or replace the whole solar street lamp head. 7, light time is short, short duration of rainy day. Usually battery storage capacity fell, the battery sufficient cause. Replace the reasonable storage battery.
common troubleshooting methods (solar street lamps 2)
1, the whole light not on. Used for outdoor lighting, solar street lamps are often faced with high temperature and rainy, cold rain and snow weather, and solar street lamps controller is usually installed inside a light pole, short-circuit phenomenon easy to cause the water to the controller. First to observe whether there is water rust is the terminal of the controller, if a controller is damaged, most likely no battery voltage measurement, such as the 12 v power supply system, solar street lamps battery voltage is lower than 10. 8 v battery has no battery, need more change. Check folding panels under normal working day if there is a voltage, electric current output. Not just panel is damaged, replace the panels. The above are no problem, you should check the light source, only through to the light source power, to see if light, no light, replace the light source. 2, solar street lamps flickering lamp holder. Of the cause of the fault, the line contact, electric, battery capacity serious decline, in the case of line no problem, replace the battery. 3, light time is short, short duration of rainy day. Usually battery storage capacity fell, the battery sufficient cause. Replace the reasonable storage battery.

The point for Sky Resources Solar Technology Co.,ltd. is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
What are you waiting for? Don't you want to provide perfect support to custom made solar lights? If yes, so, switch to solar light right away!
The rising led street light manufacturers consciousness observed worldwide are expected to be key factors driving the demand for custom made solar lights solar light.
Custom message
Contact