Solar street lamp battery and lamp installation

Because solar solar street light are energy-saving and environmentally friendly, and are green and pollution-free, they are very popular in the market. Therefore, there are still some problems that need to be paid attention to when installing. Then follow the editor to learn more about the installation of solar street lights. At the time, related introductions about batteries and lamps.　　 Battery installation　　 1. When installing the battery, be sure to handle it gently to avoid damaging the control box.　　2. The connecting wire between the batteries must be pressed on the battery terminal with bolts and copper gaskets. The main purpose of using copper gaskets is to enhance its conductivity and improve the charging efficiency.　　3. One thing that has not been paid attention to during installation is that no short-circuiting is allowed under any circumstances. If short-circuiting occurs, it will cause great damage to the battery.　　4. When the output wire of the battery is connected to the controller of the telegraph pole, it must pass through a pvc pipe.　　5. After completing the above four steps, be sure to check the wiring of the relevant controller port. The purpose of this is to cause a short circuit. Lamp installation 1. When installing the lamp, the first thing to do is to fix the relevant components. First, fix the solar panel on the solar panel bracket, then fix the lamp head on the arm, and then fix the bracket and arm on the main body. Rod, and finally lead the connecting wire back to the control box.　　2. Before lifting the lamp pole, check whether the fasteners are firm, whether the lamp holder is installed correctly, and whether the official is working properly, and then install it after simple debugging.　　3. Pay attention to some security measures, because at this time, the lamp tube needs to be hoisted, and what needs to be done at this time is the angle of the sun.　　4. Put the battery into the battery box, and then connect it back to the control box according to the relevant technical requirements. Connect the battery first, then connect the load to the solar panel. It cannot be reversed, otherwise the controller will be damaged.　　5. Debug the entire system and check whether the system can work normally.　　The installation method of solar solar street light batteries and lamps is probably the case. You may wish to refer to these items when installing, so as to ensure the final installation quality.
This is an internationally recognized standard which acts as a form of guarantee that everything Sky Resources Solar Technology Co.，ltd. does is managed to the highest quality standards.
Sky Resources Solar Technology Co.，ltd. strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
custom made solar lights problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of led street light manufacturers technology, now provides a perfect cure for that.
Always put quality over cost is the rule of thumb if you want to buy a really durable and reliable . But with Sky Resources Solar Technology Co.，ltd. , you can have the same.
Oftentimes for Sky Resources Solar Technology Co.，ltd. , this means look for the impact. Giving people something to believe in, that emotional connection, that's what solar light.